Fitting A Cat Flap

Fitting a cat flap can be a bit daunting, but it is fairly simple with the right instructions. First, decide how high you want the flap to be (on average or belly height). Mark this point on your door, and use the included template to help you drill.

If you have a kitten that is still a baby, gently prop the door slightly open and encourage it to walk through. Reward it each time it goes through.

Measure the Door

A cat flap is a wonderful way to let your pet move inside and out of your house as it likes. This can help keep your cat in good health as it ensures that it is getting enough exercise and be able to go back inside if it gets trapped outside in bad weather. It can also cut down on the amount of time you need to spend letting it in or out and can also ensure your home is secure by allowing you to be aware of when it went out.

It is crucial to make sure that the cat flap is installed correctly in order to prevent your pet from being pushed through wall cat flap it or escaping by other animals (e.g. dogs). It is essential to measure the height of your pet's belly and the entrance to your home in order to ensure that the flap is at the proper height. If your cat flap step is longer or taller than the average, you can adjust the position of the flap by moving it up or down by a tiny amount.

The next step is to use a spirit level to mark the center of the door, where you will be installing the flap. Then, using the markings as an indication, cut out the form of the flap on the door with the aid of a Jigsaw. After you have cut the area then sand the edges to create smooth surfaces. Make any holes that are required.

The process of fitting the cat flap isn't as difficult as you may believe and it shouldn't take more than two hours to complete the entire task from start to the end. The process is a bit more challenging if you need to install it on the form of a uPVC door or composite one. This is because these doors come in a variety of thicknesses, which can affect the way that holes are cut. We always suggest to contact an expert if this is your first experience working with glass.

Measure Your Cat

A cat flap can save you from hours of listening to your pet's meow for you to let it out or in. This is particularly useful when you're at work most of the day and your cat is stuck in the house waiting for you to get home in all weathers.

It is essential to first measure your cat before you begin the installation. While it may seem an easy task, it is essential to make sure you measure correctly or your cat may find it difficult to use.

First, make sure your cat is calm before you begin taking measurements. You'll need to hold them in a manner that they cannot move and make sure that the ruler or measuring tape is flat against their body and not arching in any places. You can get a precise measurement by keeping the measuring tape or the ruler flat against the body of the animal from the top to the bottom.

Once you have the measurement of your cat's body, it's time to take a look at the door and decide where you want to place the flap. Place the flap at the level of your cat's belly. This will allow them to walk through the door with minimal effort. This will also stop the flap from making a lot of noise as it swings open and closed.

You should take into consideration the thickness of the upvc cat flap door panels or composite door as well. While all timber doors have a similar thickness, uPVC or composite doors are different in their overall design. This makes fitting the flap for your cat more difficult as you have to make sure that the hole is the right size.

It is also worthwhile reading through the directions that come with the cat flap kit to locate an illustration template that can be used to mark the position of the hole in the door. This will allow you to determine where the hole needs to be located and ensure that the template is positioned precisely on the door. It is also a good idea to employ a spirit-level to ensure that the template is placed flush against the door.

Cut the Flap

Before you can put in your cat flap you need to cut the door panel to make a space big enough to accommodate it. This is a difficult task and it is recommended that you seek the help of a professional cat flap fitting service for this step should you not have the knowledge or skills to complete the task yourself. You can also read the instructions provided with the kit to discover how to do it properly.

To do this, you will need to determine the height of your cat or kitten's belly. Use this as an indication point. As a general rule, place the cat flap about 10-15 centimeters above the ground. This is the standard height of the stomach for cats. Your cat will be able to move through the flap without difficulty and will also make any other cats or curious neighbours a tough time trying to leave or enter.

Mark the position of the cat flap on the door using a pencil. Next, if your kit comes with an outline of paper, Fitting a Cat flap place this over the door and use the marks to drill holes into every corner of the template. You will then be able to cut out the shape of the template and replace it with your cat flap installation flap.

If you are installing your cat flap in an entryway made of wood or uPVC, it is possible to do it yourself if are confident enough to use using a jigsaw. Be careful not to cut into the mullions or rails that run vertically of your door. You can use a Jigsaw to cut your panel into a square or a circle according to the way you'd like it. Remember to take your time and don't make the jigsaw cut faster.

After the hole has been cut, carefully place your cat flap into its new place of residence. Make sure it's securely secured. If it features caps for screws, then put these onto the screws that protrude. After the screws are installed, sand the rough edges and then apply sealant to any gaps. This will stop the entry of draughts into your home.

Fit the Flap

If you have a basic cat flap you can open it and encourage your pet to go through by placing a small amount of cat food in the front of the door. You can also push the cat with sticks or your hand. Once your cat has become accustomed to moving through the flap, it will be able to come and go whenever it wants. This allows you to let it in and out as it wishes.

It is possible to fit the flap inside an UPVC door or glass door, but it may not be as simple as putting one on a wooden external door. This is due to the fact that the UPVC doors and certain types of glass doors do not have an even thickness. This can have a dramatic effect on the way you cut the hole for the flap, and can also affect whether your flap fits correctly once it's been installed.

Based on the type of cat flap you pick It could come with its own mounting kit as well as a template that will tell precisely where to drill the holes for it. If the kit does not include a template, you can photocopy it to create your own. It is important not to push the jigsaw too in order to cut, so it doesn't leave a bigger than needed hole in your door.

Certain cat flaps come in circular shapes, which can be more difficult to put in. If you have a circular flap it's essential to make sure the hole is in the proper location on your door as if it's not, the cat will not be able to use the flap and could be stranded outside all day (or even night).

Some cat flaps have locks that let you regulate when your cat comes and goes. They are helpful if your pet is afraid of going out in the dark or coming back inside at night. They can also be useful if you work all day. The lock can be used to allow or deny entry, and some are locked in both directions, permitting you to close the door completely. This is particularly beneficial for older or ill cats who don't want to go out in the rain.